4 Simple Ways To Fix A Loose Door Handle

4 Simple Ways To Fix A Loose Door Handle

Due to the amount of use door handles get every day, it’s inevitable that they’ll become loose over time. Fortunately, though, it’s unlikely that there’s an issue with the entire door as a whole, and door handles are often easy and inexpensive to fix on your own.

Here are 4 simple ways to fix a loose door handle, as well as what may be causing the issue in the first place. 

Why Is My UPVC Door Handle Loose? 

There are many different reasons as to why your UPVC door handles have become loose, including the age of both the door and the handle itself. Here are some of the issues that may be causing the fault:

A Build-Up Of Dirt and Dust 

Just like any other fixture or fitting within the home, door handles can create a build-up of dirt, dust and other small particles over time which then prevents the handle or lock from functioning properly. 

A Screw Is Loose Or Missing 

If a screw has got so loose that it’s fallen out, it’s likely that the entire handle will fail to work. It’s for this reason that any screws you notice to be loose should be tightened straight away, to avoid losing them altogether. 

A Spring Cassette Is Broken

Most door handles include a spring cassette inside the mechanism; this supports the handle returning to its centre position once it’s been lifted or engaged through opening or locking. If the spring cassette is broken, the door handle will feel loose or wobbly. 

How Can I Fix My Loose Door Handle? 

In order to be able to fix your door handle, it’s likely you’ll need to remove it from the door to take a closer look at the problem.

To do this, remove the handle from the door completely by locating the screws and, using a screwdriver or Allen key, undo the screws so that the handle can pull away from the door. 

Once off, you’ll need to remove the base from the handle’s backing pate so that you can see inside. A flathead screwdriver can be used to gently undo the base, though be careful not to cause any further internal damage to the handle’s mechanism.

Once you’ve identified the fault and rectified it using the methods below, the base can easily be fitted back onto the backing plate again by clipping it into position. Then all that’s left to do is line the handle up with the holes and screw it back in place on the door. 

4 Simple Ways To Fix Your Loose UPVC Door Handle

1. If the door handle is particularly old or overworked, the problem may be due to a build-up of dirt, which will require a good clean of both inside and outside the handle to ensure all particles and fragments of dust are removed. Use this opportunity to clean the lock as well in case the same thing has happened inside. ?
2. Once you’ve removed and taken apart the handle, you’ll also be able to see if any screws are loose or missing within the device. Using a screwdriver, tighten the screws or purchase replacements for any that are lost. Be careful not to over-tighten the screws, as this can also lead to the handle not working properly. 
3. The handles may bind over time due to their age or from a lot of use, so once apart, try putting a small amount of grease in the handle to ensure it’s well lubricated.
4. If none of the above methods work, then the fault may be with the handle’s spring cassette. There could be multiple reasons as to why the cassette has stopped working, from general wear and tear over time, to rust having occurred should the handle have endured any type of water damage. You can either source and purchase a replacement spring cassette, or you may find it more beneficial to simply replace the door handle entirely to avoid wasting money on new parts when the cause of the fault isn’t clear.

Leave a Comment