Winkhaus Cobra 2 vs GU Ferco G4

Winkhaus Cobra 2 Hooks Multipoint Lock 35mm Backset

Multi Point Locks

A multi-point lock is far more effective than a basic single point lock as it secures the door in three places rather than just one. This allows the door to fit more solidly in its frame when the bolts at the top and bottom of the door and in place, preventing warping of the door and helping to cut out drafts. It also means that when the door is locked it is not as easy to break it down, making the property secure from forced entry.

Right handed locks

This system is designed specifically for right handed doors, meaning that when looking at the door from the inside the hinges are on the right. This dead bolt multi point lock has 2 hooked bolts which turn upwards inside the door frame when the door handle is turned upwards. This means the door is held solidly in its frame even when it is not fully locked.

When the key is turned in the lock the centre bolt is thrown and the hook bolts are blocked, preventing the handle from being turned until it is unlocked once again. This system allows the door to be locked and unlocked from both inside and outside the property.

Perfect for…

Winkhaus is one of the leading lock manufacturers across the world and this multi point lock is one of the most popular right handed systems. It is suitable for anyone who requires a simple yet secure locking system on a right handed exterior door.

GU Ferco G4 Europa Replacement 35mm Multipoint Lock Replacement Gearbox

Multi Point Locks

Multi-point locks are far more secure locking systems than basic single bolt locks because they hold the door solidly in the doorframe at three points using bolts at the top and bottom of the door as well as in the centre. This makes them far more difficult to break down and can also help to prevent gaps between the door and its frame, which could cause drafts and warping of the door itself.

Gearbox replacement

This Gearbox multi point lock is the central point of the locking system and is intended as a replacement within the entire system. The gearbox contains all the moving parts which is why it may need replacing before other components such as the hook bolts.

Multi point locks work by throwing bolts at the top and bottom of the door when the door handle is turned upwards. The central bolt can then be thrown by turning the key, which then also blocks the top and bottom bolts, securing the door in place in three places.

Make sure that you purchase the correct gearbox replacement for your door and lock. This particular gearbox has a back set of 35mm and centre of 92mm. It is designed for use with a single straight cylinder lock and therefore not compatible with a split cylinder.

Perfect for…

Since it is a replacement component this gearbox is suitable for anyone with a damaged or worn system. It is relatively simple to install and can improve the working of an existing door lock without having to replace the entire system.

Leave a Comment