Lost Your Car Keys? Here’s How To Replace Them

There’s nothing worse than losing your car keys - especially if you don’t have a spare pair. Although a stressful situation, it’s important to know that getting a car key replacement is not as tricky as you may think. Within this guide, we will be establishing exactly what steps you need to take to replace your car keys and get on the road again as quickly as possible.

Top 3 Ways to Get Replacement Car Keys

Obtaining a new car key doesn’t have to be complicated. In fact, there are many ways to get replacement car keys within just a few days! From using specialist key cutters to visiting local garages, there will always be a solution. Below, we will discuss the top 3 ways to get replacement car keys.

1. Use a leading key cutter

One of the cheapest and quickest ways to get a lost car key replacement is by contacting a leading key cutter. The whole purpose of a key cutter is to be on hand in situations like these, meaning your issue will be dealt with both professionally and accurately. Due to the nature of the business, key cutters are guaranteed to provide you with the quickest turnaround for your key cutting needs, meaning you could be on the road again within just 24 hours!

2. Contact your car insurance provider

In most instances, it is highly unlikely that your car insurance provider will cover you if you lose your keys. However, all policies are different, and there’s no harm in finding out if they can provide you with a replacement set.

Although this may seem like one of the most straightforward options, it’s important to remember that claiming on insurance will likely affect your no claims bonus and be more expensive in the long run.

3. Visit a local garage

Visiting your local garage is another viable option when in need of a replacement car key. However, the garage may not guarantee a solution, as it might not have the right equipment to replace what you need. It’s also worth noting that, if they do have the right equipment, garages will likely charge you a large sum of money to replace a key for you.

Common Questions Asked When Replacing Keys

As you can see, there are quite a few ways to get replacement keys, all with their own benefits and drawbacks. But what information is needed to replace your keys? How long will it take to get a new pair? As the UK’s leading key cutters, we’ve dealt with a whole range of lost key enquiries. Read on to discover some of the most common questions we receive.

1. How do I know what key to order?

It can be hard to establish what key you need when it’s not sitting right in front of you. Luckily, if you are unsure of what key to order, our ‘how to identify the right key’ guide will help you out. This step by step guide will take you through a series of questions, resulting in finding the exact model you need from our stock.

2. How long will it take to replace my car keys?

The time that it takes to replace your car keys will entirely depend on who you are in contact with. As a rule of thumb, key cutters will provide the shortest turnaround time, as they will have the resources on site. When it comes to insurance providers and local garages, it will take longer to replace your car keys, as third parties are likely to be used.

Here at Fast Keys, the majority of orders will arrive the following working day.

3. Can I order replacement keys online?

Yes - you can order replacement keys online! In fact, 50% of our orders are now processed online, proving just how effortless the whole process truly is. Simply use our search function to find your specific key and order it safely and securely.

Getting Your Car Key Replacement Really Is That Simple!

You do not need to go into a state of panic when you lose your car key - simply follow these steps and you’ll have a replacement one in no time! Browse our wide selection of car keys online or give us a call on 01268 562592 for more information.

Technology within the automotive industry has come a long way, it wasn’t so long ago that seatbelts in the rear seats were a luxury! But it seems that nowadays every make and model of vehicle benefits from an array of useful gadgets to make our daily commutes and even the dreaded school run almost pleasurable. For example, heated seats, quick clear windscreens, Bluetooth connectivity, cup holders galore and even keyless entry and keyless start. 

We have all been there, holding the baby or a bag of shopping whilst struggling to get the keys out your pocket to unlock the car. Keyless entry means that by simply approaching the vehicle the doors will unlock, in some cases the engine can even be started remotely. Whilst this clearly has its benefits in our day to day lives, this convenience can come at a cost; the signal from a keyless fob can easily be intercepted by savvy criminals with the right equipment.

Each key fob is specifically programmed to the vehicle in order to open the car. Without getting too technical, a car key remote uses a chip that creates a unique code, your car has the same sort of chip that also generates a code, when the codes match then the car opens. 

The recent advancements in “always on” key fobs facilitating keyless entry, opens up a whole new vulnerability in vehicle security. The way keyless entry works is that as long as your car keys are within range, anyone can walk up to your car and open the door, that’s why newer vehicles won’t communicate with the fob until you are about a foot away. Criminals are now able to get hold of a signal amplifier that can pick up signals generated by car keys from up to 300 feet away and then transmit them to your car. Basically, this means that even if your keys are safe or securely locked in your house, these criminals can still walk straight up to your car, open it, and simply drive away.

A quick search on you tube and you can see how common this type of theft is.

VIDEO CAN BE FOUND HERE

This type of signal amplifying isn’t unique to car keys, anything with an RFID chip can be manipulated in the same way, bank cards, oyster cards etc.

One quick and relatively cost-effective solution is to invest in an RFID blocking pouch or wallet.

VIEW SMALL POUCH

VIEW LARGE POUCH

Simply place your key fob into the convenient pouch and the signal is blocked, you can test this by pressing the buttons through the pouch and the car will not unlock. An example of these pouches can be found on our website. This a very simple and cost-effective solution to a problem which is fast becoming more and more common place.

As the technology incorporated into vehicle keys has become increasingly complex in recent years, so has the cost of buying spares. Main dealers and garages invariably charge in excess of £250 to supply a programmed car remote key.

People looking to save money will invariably search the web and they will find websites offering reconditioned remotes at a fraction of the price.

The sellers of these products simply state that the buyer will have to do the following:-

1. Find a locksmith that is suitably equipped.

2. Replace and cut a new mechanical key.

3. Reprogram the transponder and remote to the new vehicle.

All very fine in theory and initially it may seem that there could be a potential saving of up to 50%, when compared to the cost of a remote key from a main dealer. However, buyers should beware of the following facts before acquiring a used/ reconditioned remote key:

Problem 1. The large majority of Volkswagen and Audi keys will be “Locked” and the transponder chip cannot be re-written to another car. This is also true of Mercedes, BMW, BMW Mini, Seat, Skoda, Vauxhall, Fiat & Honda, as well as most Citroen, Renaults & Peugeots.

Problem 2. Buying a remote key because it looks identical to the one you require.

Peugeot, Citroen, VW & Audi all produce remote keys that can look identical, however, the internal components can vary enormously. In all cases for Citroen & Peugeot remotes need to be ordered using the vehicles V.I.N. plate ID to ensure you are supplied with the correct part for your car. The year and specification alone is not sufficient information.

Problem 3. From our experience at Fast Key Services approximately 70% of used remotes cannot be programmed unless the transponder chip is replaced. This is another cost that will not have been factored into the price.

When considering the potential pitfalls and the extra costs involved, most customers would be better off seeking the expert advice of a qualified locksmith before embarking on the internet. They would get a much more certain outcome rather than take their chances on the web. Fast Keys are extremely competitively priced compared to dealerships and in most cases will end up working out cheaper than buying the remote and finding someone that can carry the work out cost effectively.

Please feel free to contact the FKS Trade Counter, should you require any additional information or advice prior to buying a used remote key.

Email: tradecounter@fastkeys.co.uk Telephone: 01268-562592

Here at Fast Keys we have yet another addition to the ever increasing range of vehicle remotes that we can supply & programme at our trade counter in Wickford.

The Renault three button key card was introduced by Renault in 2003 to operate on Renault Scenic, Megane & Grand Scenic models and ran through until 2008 after which they reverted back to a more traditional mechanical remote key.

There is an emergency key blade incorporated into the key card which is located in the battery holder of an existing original key card. The key blade can be used to operate a mechanical key barrel discreetly hidden under a plastic key cab on the passenger door allowing access of the vehicle should the remote facility fail.

The good news for owners of these vehicles is we are able to supply and programme new key cards up to 40% cheaper than a main dealer and we will also complete all the work whilst you wait.

Ford Transmit Van Remote Key 2006-2012

Programming Blue 3 button remote keys

Ford Part Number: 6CIT 15K601 AG-1721051

The blue coloured remote key used on Ford transit vans is unique and differs in various ways from the standard black remote which is used on many Ford vehicles.

One major difference being, that the battery is boosted each time the key is turned in the ignition lock. As the battery is effectively self-charging, the remote casing is sealed in order to protect the circuit board and battery.

Depending on usage, the average life of a remote for these transit vans is around six years. Being sealed units, the batteries on the blue headed remote cases cannot be replaced; hence, when the battery eventually fails; the buttons will no longer operate the central locking system and your remote will need to be replaced and programmed using diagnostic equipment.

Some Ford owners will be aware of the procedure to synchronise a remote to the vehicle. This is done by turning the key in the ignition barrel to position two and then back to position 0 four times in six seconds; on the fourth and final turn a beep from the dashboard is the signal to press any button on the remote. Once this process is complete, the remote will be synchronised to the vehicle.

This procedure however does not apply to the blue remotes for Ford transit vans, as there is no manual process to synchronise the remote to the vehicle. This can only be completed by using specialised key programming equipment via the vehicles OBD (on board diagnostic) computer port. This operation simultaneously programs the vehicles transponder (engine immobiliser) chip and remote facility.

Most Vehicle crime is preventable. It can take as little as 10 seconds for a thief to steal something from your car. Make sure you take extra measures to ensure your vehicles is as secure as possible. Don’t be a victim!

Here are our top 6 tips to prevent vehicle crime.

1. Never leave valuable items in your car, or on display in your car. This includes items such as sunglasses, satellite navigation units, in car stereo displays or even loose change.

2. Wipe away the satellite navigation suction mark on your windscreen. If there is a mark on the screen then there is a chance a satellite navigation unit has been left in the glove box.

3. Fitting anti-tamper screws to your number plate will help to prevent vehicle cloning. Thieves can steal your number plate and put it on a identical vehicle to commit crimes.

4. Never leave your car keys where they can be seen from the front door. Thieves will try and reach (phish) them through your letter box.

5. Park with care, particularly at night or if you are leaving the vehicle for a long time. If possible park in a busy, well-lit area.

6. Always have a spare key.

The modern day car key has evolved a great deal in recent years, however the majority of car drivers are completely unaware of the technology incorporated into the key that operates their vehicle. This is understandable as in most cases the key looks and operates the way all vehicle keys have in the past, simply insert the key into the ignition lock and turn to start the engine. Although the basic principle of the mechanical key remains the same, it’s there where the similarity ends.

An electronic engine immobilizer, commonly known as a transponder chip, is located in the plastic head of your key. When you insert the key into the ignition lock, the transponder chip relays a code to a receiver, usually located around the steering lock. The vehicles ECU (engine management unit) will then allow the engine to start.

Unfortunately for the car driver this system is so efficient that most people are blissfully unaware of the technology involved. This is proven because, as a key supplier, processing orders for keys cut to code on the internet, we continually receive enquiries and potential orders for vehicle keys from people under the assumption that we can send them a replacement car key in the post that will start their car.

Unfortunately mail order car keys, in most cases, are not possible. In order for the key to start your car it must either be cloned from an existing key or physically programmed to the car using an OBD cable plugged directly into the vehicles diagnostic port. In either case special equipment is required to complete the process enabling the key to start the engine.

If your vehicle was produced after 1996 it is almost certain that your existing key has a transponder chip, there are variations of the systems used by different manufacturers. For example fixed code transponders where the code remains the same or rolling code transponders where the code changes each time you remove the key from the ignition. Remember these systems are passive, you as the car driver do nothing to activate or de-activate the process. Simple and effective in its design, but potentially extremely costly if you don't keep a spare key.

People usually avoid buying a spare key because they are unaware of the financial implications of having their only key replaced. If your only key is lost or broken then the cost of replacing it can run up to £400, and added to that, there is the inconvenience of potentially losing the use of your vehicle for a couple of days whilst the problem is resolved by a garage. Most transponder keys can be cloned or programmed by locksmiths for as little as £30.00, a small price to pay considering the alternative.

So why run the risk? Always keep a spare!

Unfortunately, our cars often decide to give up on us when we need them the most. One of the most common inconveniences is when the ignition key doesn’t turn. If this happens to you, the best thing to do is stay calm, in order to avoid causing further damage. Here are 5 simple ways to fix an ignition key that won’t turn, from purchasing a car key replacement to checking the steering wheel.

How Does an Ignition Key Work?

For most modern cars, ignition keys are symmetrical in their shape, so that drivers can insert them into the ignition either way round for greater ease. When the key is turned in its slot, a set of tumblers in the ignition are forced into a specific arrangement, enabling the key to rotate. The circuit then provides power to the starter motor, typically through a computer chip, which ultimately starts the engine by allowing the current to flow through the ignition system.

5 Ways To Fix An Ignition Key That Won’t Turn

1. Try Turning The Steering Wheel 

The problem may not be with your ignition key at all - the steering wheel locking may be the thing causing issues.

Many steering wheels are designed to lock once the key has been removed from the ignition cylinder, resulting in the wheel sticking in one position. Try gently turning the steering wheel from right to left, while simultaneously turning the key carefully in the ignition. If this fails, try rocking the wheel instead, all while wiggling the key gently. Once the key turns, the steering wheel will unlock itself.

2. Wiggle The Key In The Ignition

Without touching the steering wheel, you can also try to gently wiggle the key inside the lock, in order to help enable the current to flow. Be careful when doing this - don’t apply too much force or pressure as this could result in further damage. By jiggling the key in the ignition, you may be able to free any slight destruction caused to the lock wafers that’s resulting in the key not turning.  

3. Try Lubricating The Lock

The issue may be with the lock itself, as opposed to the key. Try to lubricate the lock - this will help to release any dirt particles that are preventing the key from turning. A silicone-based lubricant is recommended, as these lubricants prevent dirt from building up and causing the same issue in the future.

Spray the lubricant into the lock, wiping away any excess that leaks out. Then, insert your key and turn it. If the key doesn’t turn, you can try gently wiggling it like in the previous step. Try adding more lubricant if this is still not successful.

Debris in the lock may not be the problem if this step doesn’t work after several minutes.

4. Check The Gear Shift Or Battery

A simple solution to getting the ignition key to turn may be as easy as checking the gear shift. In automatic cars, the ignition key won’t turn in the lock if it’s not parked or in neutral. Gently move the gear shift from side to side to check its fully in position, before trying to turn the key.

It’s also worth checking if the battery is dead in your car, as cars with more modern and innovative ignition systems won’t enable the driver to turn the key if the battery has gone. Although a dead car battery can be a frustrating issue, it’s also a very simple one to solve.

5. Get A New Car Key

If the above ways of fixing your ignition key don’t work for you, it may mean the key itself is broken. This problem can be fixed by getting either a car key replacement, or by getting your existing key repaired. It’s always a good idea to have a spare car key cut, so you can keep it on hand as an extra, just in case.

Always Losing Things? Here's How To Avoid Losing Your Keys

There’s nothing worse than the feelings of dread and frustration that come from losing your keys. Not only is it worrying wondering if and when you’ll find them again, but it’s also an inconvenient situation when you have somewhere you need to be. For those of us who are prone to misplacing things, here are some handy tips on how to avoid losing your keys. 

1. Key Cabinets 

A key cabinet provides a great way to keep your keys safe and secure at all times. Particularly beneficial for those who have multiple keys to look after (e.g: business owners), a key cabinet offers both peace of mind and an organised storage capacity.

Key cabinets make life that much easier by taking away the stress of both losing your keys and finding a safe space to store them when they’re not in use. Key cabinets are available in a range of different styles and systems, so you can pick the one that’s right for you and your lifestyle.

Mechanical locking cabinets, key safes, emergency cabinets and electronic locking key cabinets are just some of the different types available, all designed to keep keys in a safe space that keeps them protected from the wrong hands.  

1. Key Rings 

When it comes to keeping your keys organised, key rings provide the perfect solution. Key rings are available in a variety of different styles and sizes, so will suit you whether you have a few personal keys, or a large number of keys to look after.

As well as keeping your keys safe, key rings also keep all your keys in one place, making them easy to get to when you’re in a rush. Key rings help you to avoid the fumbling about in your bag whenever you reach the front door, and also help reduce wear and tear from the keys when in pockets.

Key rings come in a range of different designs, so you can pick one that’s unique to you. 

1. Designated Spot 

A great tactic for keeping track of your keys is to create a designated spot for them in your home, where you know you will always be able to find them. For most people, this would be by the front door in a home and by a communal office space for those sharing keys in a work environment – but this space can be adapted to wherever is suitable for you and your personal circumstances.

Although this spot should be easily accessible for you to reach them, be sure they’re not visible to other people – remember to always keep your keys safe from unauthorised individuals.  

1. Replacement Keys 

Emergency replacement keys help to act as a reliable back-up plan when your original key goes missing. Apart from door keys, here are some of the other types of keys that we recommend getting a spare of:

• Car keys 
• Office keys 
• Locker keys
• Garage door keys
• Post box keys 
• Window keys 
• Unit and cupboard keys 
• Master keys 
• Roof rack keys 
• Filing cabinet keys 
• Desk keys 
• Key cabinet keys 

1. Key-Finding Gadgets 

Lost keys are a common issue for a lot of people, which is why there are now gadgets available to help you find your keys once they’ve gone missing. Both wireless key trackers via apps and remote-control key finders are now on the market to help identify the place in which your keys are hiding, saving you valuable time and effort searching for them. These gadgets are great for tech-savvy people who want to minimise the time spent looking for their keys once lost, though with the hints and tips above, this should hardly ever happen!  

Discovering that your car key remote isn’t working is as stressful as it is frustrating, not to mention inconvenient. If you find yourself unable to use your car key remote, here’s a guide as to what may be causing the fault and the ways in which a car key remote can be programmed. 

Why Is My Car Key Remote Not Working?

It’s quick and easy to get a car key replacement, should the worse happen and you’re unable to fix your key remote. However, here are a few factors that may be causing the problem as well as simple solutions to fix them. 

Is The Fault With The Car? 

The car key remote itself may not be broken and the problem may be with the car’s locks or signal receiver instead. Use your spare car key remote (which you should make sure you always have for circumstances such as these) to test whether or not that’s working.

Bear in mind that if you bought both the spare and the main remote at the same time, the problem could still be with the batteries of the car keys as opposed to with the car.

Have The Remote’s Batteries Died?

While car key remotes do have impressively long battery lives, the time will at some point come when they need replacing and renewing. It’s likely to be a fault with the batteries if the buttons on the key need to be pressed multiple times before working, or if the key is working sometimes but not constantly.

Although many car keys are different, the majority run on Lithium coin batteries which can be easily sourced and replaced to get you back in your car in no time. 

Are There Any Broken Pieces In The Remote?

If you’re able and confident to do so, carefully take the car key remote apart to see if there are any broken or loose parts that are causing the device’s faults.

The majority of remotes split in half at the sides and can then easily be taken apart and put back together without causing any further damage. Loose pieces may be able to be put back into their place to start the key working again, although broken sections may need renewing and replacing.

Use this opportunity to gently dust off the car key in case any dust or dirt has entered the fob to stop it working properly. 

How Does A Remote-Control Car Key Work?

Remote control car keys, also known as keyless remotes, are essentially short-range radio transmitters that once pressed, send a coded signal to your car’s radio receiver by radio waves – this code is generated by the key fob’s controller chip.

The receiver unit then receives this code, and either locks or unlocks depending on the button you’ve pressed. Both the key and car must be in a certain range of one another for the signal to work, which is generally around 5-20 metres. 

The code itself is generated as one out of billions of possible others and is created via a number generator that’s located in both the transmitter and the receiver. Each time you press a button on your car key remote, two codes are generated and transmitted – one being the security feature code as mentioned above to unlock or lock the car, and the other is a function code telling the vehicle what specific task to perform (such as locking the doors or unlocking the boot).

Both the receiver and transmitter are coordinated to ensure that both recognise each other’s code that’s been sent. This coordination prevents other people from using their key remote to open your car, as they are not synchronised together and therefore won’t respond. 

How Do You Programme A Car Key Remote?

Programming your car key remote may seem like a daunting task but it’s an easy job to accomplish, you just need to be sure you’re doing each step in the right order and timeframe. The way in which you programme your car key remote will differ depending on whether your car has an ignition key or a push-button start, so here’s what to do in both scenarios:

For Cars with Push-Button Starts 

Once in the car, make sure all doors are closed before quickly pressing and releasing the start button 15 times (make sure you quickly press the button in just 1-2 second intervals). The engine should not be started during this process.

After pushing the button 15 times, push and release the lock button of the key fob, where the doors should immediately lock. This lock signifies that the programming is complete, and your key should be ready for use. 

For Cars with Ignition Keys

Once in the car, make sure all doors are closed and insert the key into the ignition before turning it to ‘ACC’ or ‘Accessories’ (the second position) – the engine should not be running at this point. Wait for 10 minutes and 30 seconds, before switching the ignition back off. 

After just a few moments, repeat the steps again and do this a total of 3 times. Your key should now be programmed and ready for use.

Struggling with a broken car key remote? No problem. Get in touch with us here at Fast Keys to discuss replacement or fixing solutions.